General features of the all "Neue Heimat" Rackmounts:

-handmade in Munich, Germany
-all controls are located on the front faceplate.
-symmetrical design for easy use
-230 V shielded
-2-pole mains switching
-all Audio wiring shielded
-soft ground lift
-engraved frontplate 3mm alumminium (2hu) & 4mm (4Hu)
-colour layout of the engraving
-venilation holes on top
-seperate earthing of all housing parts
-all psus are engineered especially for audio use and built in house by hestudiotechnik
-no interferences from the transformers (toroidal), denoised +48V)
-switchable +48 Volts ramped Phantom, including indicator lights
-Instead of cheap pots we use goldplated rotarys for gain control

Neue Heimat for tube modules:

-The modules are supplied with original 220 Volt to provide the original performance and longlife for tubes.(230 or 240 Volt) limited to 220 Volts)
-We incorporated a sensitivity switch, originally used in V series consoles that makes the fixed 34dB gain switchable downwards in 3 dB steps.
-The downward pads are matched for stereo use!
-Both channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights.
(ramped +48V doesn`t harm classic input transformers with high ratio like V72, V76, V77 (1:40!!!!!!!!)

Custom service:
please ask for custom solution-the customer gets a CAD pic before your Neue Heimat goes into CNC production. If there`s something you want to change-no problem.

Racking solutions without modules
(You find a large variety of loaded rackmounts under used equipment/outboard)

1x Neue Heimat TAB V76 and PEV EQ

Tab Neue Heimat V76 and Neumann PEV EQ

Beside all common features like ramped +48, 230 to 220V step down, shielded AC, this rackmount gives you the full control of your output levels. bypassswitch for the EQ... plus a super fast peak led indicating when spikes boost over +18dBu

1x Neue Heimat for EAB MV63

Tab Neue Heimat MV63 Mono

Beside all common features like ramped +48, 230 to 220V step down, shielded AC, this rackmount gives you the full control of your output levels. One Neumann Led-meter, the right choice for levelling bass guitars....plus a super fast peak led indicating when spikes boost over +18dBu

1x Neue Heimat for TAB V76 f

Tab Neue Heimat V76F Mono

For all those who need the best "Tube Overdub Mic" pre solution on the market.

Beside all common features like ramped +48, 230 to 220V step down, shielded AC, this rackmount gives you the full control of your output levels. One Neumann Led-meter, the right choice for levelling bass guitars....plus a super fast peak led indicating when spikes boost over +18dBu

The F model stands for remotable. We changed the gain switching design, so the V76F provides 3 major Gain settings and 11-way 3dB fine adjust rotary.

The V76F is the most comfortable to use V76-providing the orignal big V76 sound.

4 HE Rackmount V 76 + U 73a

On the right channel there`s space for a U73-a three stage push/push variable mu Limiter which is the fastest tube compressor ever built due to its forward triggered sidechain. Please send us your U73, U73a or b version for free modification. Of course your device can easily put back to original.

-full threshold control on the u73 with variable release time (rackmount differs-depends on the module U73, U73a, U73b)
-we added a easy to use hardwired bypass! (the coin switching on the module causes noise and isn`t very comfortable).
-both devices can be used indypendently.

Neue Heimat for V76 Stereo

racks two V76 (all versions of the V76).

like all tube modules inside a Neue heimat rackmount, the units are supplied with original 220 Volt to provide the top performance and longlife for tubes.(230/240 Volt limited to 220 Volts). Ramped Phantom for gentle treatment of your high ratio input transformers and a super fast output peak led to prevent driving your gear behind the V76 too hot.

Optional we offer either output level with 2 pots

or output level with two sensitivity switches (goldplated aerospace rotary)

Neue Heimat for V76 Mono

Beside all common features like ramped +48, 230 to 220V step down, shielded AC, this rackmount gives you the full control of your output levels. One Ntp Vu-meter, the right choice for levelling bass guitars....plus a super fast peak led indicating when you boost over +18dBu

Neue Heimat for Lorenz V241 Mono

Beside all common features like ramped +48, 230 to 220V step down, shielded AC, this rackmount gives you the full control of your output levels. One Ntp Vu-meter, the right choice for levelling bass guitars....plus a super fast peak led indicating when you boost over +18dBu

Neue Heimat for U73+ U73a

Our brandnew 4Hu Neue Heimat U73 Stereo gives you full threshold control on each channel a variable release time and you can also link both sidchains for stereo.

The next series will be fitted with easier to use hardwired bypass switches on the frontpanel because most units have a coin switch. (different to picture)
Because of its fixed set up without the Neue Heimat rackmount, the U73 only found its way outside Germany in one specific application; as a final mastering compressor for disc cutting laths, mostly in conjunction with an automatic release trigger; the todays very hard to get "Varicom".

Send us your U73 modules and you get back the Big Boss heavy weight Limiter. (24kg)

Empty rackmount incl. all modifications on your U73.

Please ask for specific changes like for
U73b and similiar modules and complete refurbishing of your modules.

Neue Heimat for V73 Stereo

1x TAB V72 mono

-DI Input via high quality impedance matching transformer, input located on the frontplate with input selector Mic/DI.

-80Hz Low cut to get rid of tube rumble and other disturbing ground floor noise (your AD Converters will love it.

-Impedance selector for dynamic/transformer balanced mics or for usage with TLM mics.
This switch can also be used to get more or less colouration.

Of course this rackmount provides all common features like ramped phantom and 11-position goldplated rotaries etc.

1x TAB V72 mono

Neue Heimat for TAB V77

The one and only professional housing for V77 preamplifiers.
The modules are supplied with original 220 Volt to provide the original performance and longlife for tubes.(230/240 Volt limited to 220 Volts)
We incorporated a sensitivity switch (goldplated aerospace rotary) originally used in V series consoles that makes the fixed 34dB gain switchable downwards in 3 dB stepsand combined it with a 3 step gain range switch. This two switches together are identical to the original W77 gain switch, but offer you a finer gain setting.
Both channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights.

Neue Heimat for TAB V78

Housing for two V78 preamplifiers.
The modules are supplied with original 220 Volt to provide the original performance and longlife for tubes.(230/240 Volt limited to 220 Volts)
We incorporated a sensitivity switch (goldplated aerospace rotary) originally used in V series consoles that makes the fixed 34dB gain switchable downwards in 3 dB steps. The downward pads are matched for stereo use!
Both channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights. V78 Modules have to be modified for max. performance in this rackmount.

Neue Heimat for V72 Stereo MK3

The most ordered housing has space for two V72, V72a, V72b, preamplifiers.
The modules are supplied with original 220 Volt to provide the original performance and longlife for tubes.(230/240 Volt limited to 220 Volts)
We incorporated a sensitivity switch (goldplated aerospace rotary) originally used in V series consoles that makes the fixed 34dB gain switchable downwards in 3 dB steps. The downward pads are matched for stereo use!
Both channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights.

now the unit is coming with 34dB scale!

Neue Heimat for V74 Stereo

Neue Heimat for N52a

racks the common N52a power supplies for all tube mics which use The AC 701 tube.
For Mics like M269, M249, M49, M50, complete KM series....

You can choose between Mic and XLR Audio out on the rear or frontplate.

Ask for your Mic Psu solution incl. Mic to psu leads.

Neue Heimat for 8x Telefunken V672

There`s a 4Hu new home for 8 V672 modules from Telefunken.

This rackmount is equipped with an original 24V 1A PSU mu shielded Psu.

The rackmount incorporates eight selectable gain ranges (change of impedance) (0-35) and (15-50db). The gain range 35 db adds a slight top end lift to the signal so it sounds pretty much like a Telefunken 676a. On postion 50db you get the neutral "neveish" Telefunken 672 sound. The modules will be modified to prevent oscillation while changing the gain. Gain can be adjusted in 3db steps via a Goldplated aerospace 11-position rotary switch. The gain selector is stereo matched with a maximum of 0,08dB tolerance.

Please send us your modules for modification (no extra costs).

Neue Heimat for 2x Neve 2254a

4 HU housing for Neves`s famous 2254aa Compressor-Limiter
SC-link on frontplate with illuminated "pushbutton" switch. Each module is supplied independently-twin PSU!

Neue Heimat for 2x Neve 33114

There`s a 3Hu new home for 2x Neve 33114 channel modules

This rackmount is equipped with 48V switchabel for each module and an 24V PSU Psu.

Neue Heimat for 8x V476B

There`s a 4 Hu new home for 8 V476B modules from Neumann

This rackmount is equipped with 48V switchabel for each module and an original 24V 1A PSU mu shielded Psu.

Neue Heimat for 8x V676a

There`s a 4Hu new home for 8 V676a modules from Telefunken.

This rackmount is equipped with 48V switchabel for each module and an original 24V 1A PSU mu shielded Psu.

Neue Heimat for 2x Cadac G268-D

Custom solution for 2 Cadac Channel Modules

Symmetrical design with 4 additional Haufe transformers for +30dB outputlevel,

Mic Line switch

All controls are located on the front faceplate.

The Mic Pre channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights,

Output Pot on both channels and a power supply via an customised 24V + 44V PSU.

Neue Heimat for 2x Quad-8/248

3 Hu Custom solution for 2x Quad-8/248 Mic Pre + EQ Modules

Symmetrical design with 4 additional transformers for +22dB outputlevel,

extra line in switchable

The Mic Pre channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights,

Output Pot on both channels and a power supply via an customised + -21V PSU.

Neue Heimat for TBG E601

2 HU housing for TBG mic pres with all common features of the Neue Heimat transistor line.

we add 2 outputtransformers for symetrical design

we recommend sending us your modules for installation inside the rackmount.

Neue Heimat for PV76

Neue Heimat for V676a

Neue Heimat for V676

2 HU housing for Telefunken V676 mic pres with all common features of the Neue Heimat transistor line.

For the 676 we added a -.10Db pad switch to provide the full gain range from 0-76db without dead spots.

We recommend sending us your modules for installation inside the rackmount.

Neue Heimat for V276

2 HU housing for Siemens 276 mic pres with all common features of the Neue Heimat transistor line.

The modules are supplied with internal 24 Volt.
Symmetrical design for easy use, all controls are located on the faceplate.

Both channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights.

Neue Heimat for V276 & W295

2 HU housing for combining a Siemens 276 mic pre and a W295.

The housing for your Mic Pre channel is coming up with switchable +48 Volts ramped Phantom, including indicator lights.

Neue Heimat for V672

The Neue Heimat rackmount for Telefunken 672 Modules presents one of the most sophisticated housings incl.moddings inside our Neue heimat transistor product line.

The rackmount incorporates two selectable gain ranges (0-35) and (15-50db). The gain range 35 db adds a slight top end lift to the signal so it sounds pretty much like a Telefunken 676a. On postion 50db you get the neutral "neveish" Telefunken 672 sound. The modules will be modified to prevent oscillation while changing the gain. Gain can be adjusted in 3db steps via a Goldplated aerospace 11-position rotary switch. The gain selector is stereo matched with a maximum of 0,08dB tolerance.

Of course the neue Heimat is equipped with all common features like +48 Volts ramped, engraved frontplate, shielded Ac-wiring, Neue Heimat ultra low IF- Psu, engraved frontplate...

If you want to hook up your 672 or 672/2 modules, please send it to us for modification (no extra costs).

Neue Heimat for V372

The Neue Heimat rackmount for Telefunken 372 Modules

The rackmount incorporates a gain range from 20 to 42 db Gain can be adjusted in 3 or 1,5dB steps via a Goldplated aerospace 11-position rotary switch. An additional -20db Pad pulls it down for high SPL use. The gain selector is stereo matched with a maximum of 0,08dB tolerance.

Of course the neue Heimat is equipped with all common features like +48 Volts ramped, engraved frontplate, shielded Ac-wiring, Neue Heimat ultra low IF- Psu, engraved frontplate...

Neue Heimat for Telefunken U373a

2 HU housing for Telefunken U373a compressor/limiter.

the rackmount provides Stereo-link/SC Link ,hardwire bypass and a blanced output control when the unit is active. This output control allows to listen & compare compressed and uncompressed signal at the same volume.

great on vocals, bass & guitars

Neue Heimat for NTP 179-160

2 HU housing for NTP-160 Compressor limiter in full danner size.

Rackmount for this famous dynamic tool. The rackmount provides +-15V
" Low IF " voltage supply and a Stereolink switchable directly at the module.

Neue Heimat for Neumann U473a

2 HU housing for Neumann`s famous U473a Compressor limiter in full danner size.

Of course Stereo-link and Peak-limit functions are wired to the frontplate.

Neue Heimat for Filtek
Kompressor BKE 3

2HU housing for Filteks "Neumann U273ish" BKE3 in full danner size.

The rackmount comes with all common features of the Neue Heimat product family.

Neue Heimat for 8x W295b

There`s a 4Hu new home for 8 W695 series equalizer modules from Siemens.

This rackmount is equipped with a hardwired bypass for each module and an original 24V 1A PSU mu shielded Psu.

Neue Heimat for 8x W295b

There`s a 4Hu new home for 8 W295 series equalizer modules from Siemens.

This rackmount is equipped with a hardwired bypass for each module and an original 24V 1A PSU mu shielded Psu.

Neue Heimat for Neumann PEV series

2 HU housing for Neumann PEV eq

The modules are supplied with a 24V power supply.

Bypassswitch!

Symmetrical design for easy use, all controls are located on the faceplate.

Neue Heimat for Lawo EQ series

Neue Heimat for Siemens W295 EQ

Neue Heimat for Telefunken W695

Neue Heimat for Filtek Mk3

2HU housing for Filteks EQ in full danner size.

Of course Stereo-link and Peak-limit functions are wired
to the frontplate.

Neue Heimat for Neumann EQ Series

Neue Heimat for 8 WSW UA Modules

Custom solution :

Symmetrical design, Low-IF Psu and all common qualities and features of our Neue Heimat series.
8x 48V phantom power

Neue Heimat for 5 Neumann Modules

Custom solution for :

2x Neumann U473a
1x Neumann PEA Eq
1x Neumann PEA Stereo EQ
1x Neumann OEV EQ

Symmetrical design, Low-IF, Double Psu (24V, +- 15V), Peak limit funtion, stereo link, and all common qualities and features of our Neue Heimat series.

Rackinsolution 10x deltalab distributor amps

Delta Lab "Euro Rack" Solution.

This 10 card-10 to 60 channels distribution racks now`s equipped with lot`s of wiring and hardware improvements:

-Backpanel on multichannel SUB-D 25 pin
-New internal audio- wiring
-Safe 230 AC
-Breakoutpanel each with 2x XLR In and 12 XLR Outs.

Neue Heimat for 4x Telefunken IPS EQ

Custom solution for 4x Telefunken Ela Eqs "IPS 2000F"

Symmetrical design, Low-IF Psu and all common qualities and features of our Neue Heimat series.

Neue Heimat for 1x Neumann W75K+
1x V72

2 Hu Custom solution for WK75K lowc cut filter in combination with a V72 preamp

The modules are supplied with original 220 Volt to provide the original performance and longlife for tubes.(230/240 Volt limited to 220 Volts)
We incorporated a sensitivity switch (goldplated aerospace rotary) originally used in V series consoles that makes the fixed 34dB gain switchable downwards in 3 dB steps.

The Mic Pre channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights,

Neue Heimat for 2x Disa Limiter

Custom solution for 2 Klangfilm RZ 062b Valve EQ Modules + PSU

Symmetrical design

Hardwired bypass on each eq limiter channel

Attack, realease, sidechainlink custom made

All controls are located on the front faceplate.

Neue Heimat for 2x Klangfilm RZ062b

Custom solution for 2 Klangfilm RZ 062b Valve EQ Modules + PSU

Symmetrical design

Hardwired bypass on each eq channel

All controls are located on the front faceplate.

Neue Heimat for 2x Klangfilm RZ062a

Custom solution for 2 Klangfilm RZ 062a Valve EQ Modules (slave Rack)

Symmetrical design

Hardwired bypass on each eq channel

All controls are located on the front faceplate.

Neue Heimat for TAB V76+U73

Custom solution for TAB V76+U73 Modules

Symmetrical design for easy use, all controls are located on the front faceplate.

NTP Metering switchable between V67 and U73 Output

All controls are located on the front faceplate.

The Mic Pre channel is coming up with switchable +48 Volts ramped Phantom, including indicator lights,

-full threshold control on the u73 with variable release time (rackmount differs-depends on the module U73, U73a, U73b)

-we added a easy to use hardwired bypass! (the coin switching on the module causes noise and isn`t very comfortable).

-both devices can be used indypendently.

230 Volt limited to 220 Volts

Neue Heimat for U274&W295

Custom solution for 6 EQ Modules and 2 Mic Pre`s from Siemens

Symmetrical design for easy use, all controls are located on the front faceplate.

The Mic Pre channels are coming up with switchable +48 Volts ramped Phantom, including indicator lights, -10db pads

Hardwired bypass on each eq channel and a power supply via an original mu shielded 24V 1A PSU.

Neue Heimat for Disa

basically a differently wired V72 2HH rackmount for two Disa General purpuse amplifiers ( the danish V72 dependance)

features please see V72.

Neue Heimat for ADR Gemini

Contact us!